<span class="highlight">boat</span> <span class="highlight">loader</span> 200 series
Submitted: Saturday, Jan 05, 2008 at 18:10
ThreadID:
53141
Views:
2248
Replies:
5
FollowUps:
8
This Thread has been Archived
Member - bill
has anybody fitted
boat loader to 200 series if can you tell me what make and what size tinnie thanks bill
Reply By: Kev & Darkie - Saturday, Jan 05, 2008 at 18:48
Saturday, Jan 05, 2008 at 18:48
Bill,
Have you tried to contact Custom
Boat Loaders??
Here is their contact details
They should be able to give accurate advise on what you are after.
Cheers Kev
| Russell Coight:
He was presented with a difficult decision: push on into the stretching deserts, or return home to his wife.Lifetime Member
My Profile My Blog Send Message |
AnswerID:
279964
Follow Up By: Member - bill - Saturday, Jan 05, 2008 at 19:06
Saturday, Jan 05, 2008 at 19:06
yes i have.their response was, at the moment they have not built one yet, & if i could bring the vehicle over to W.A. , i would love to take them up on this offer, but I'm in
Wollongong NSW.
Also tried Rhino, but they also cannot help me until after February.
FollowupID:
544170
Follow Up By: Kev & Darkie - Saturday, Jan 05, 2008 at 19:38
Saturday, Jan 05, 2008 at 19:38
Bill,
That would be a good excuse to go for a drive LOL
Kev
| Russell Coight:
He was presented with a difficult decision: push on into the stretching deserts, or return home to his wife.Lifetime Member
My Profile My Blog Send Message |
FollowupID:
544179
Follow Up By: robles - Saturday, Jan 05, 2008 at 22:12
Saturday, Jan 05, 2008 at 22:12
Try Tinnie Tosser. I had one on my 100 series and had it converted to the 200 series yesterday.
Glenn has all the measurements and has other booked in.
He is on 0754987339 which is just north of
Brisbane
The best rack that I could find and have travelled over all the northern part of Aust for the last three years without problems.
I have a 3.5 Sea Jay Nomad .
FollowupID:
544195
Follow Up By: Member - bill - Sunday, Jan 06, 2008 at 05:15
Sunday, Jan 06, 2008 at 05:15
thanks i will call him . any probems with rear door hitting tnnie
mine is a3.75 dart are you ablie to email a photo thanks bill
FollowupID:
544228
Follow Up By: Gone Bush (WA) - Sunday, Jan 06, 2008 at 10:26
Sunday, Jan 06, 2008 at 10:26
Not the Dart !!
Sorry, reminds of the goggomobile ad.
The other day in
Perth we had a bushfire that burnt a couple of houses including one with some classic cars inside it.
There's Geoff Parry, intrepid Channel 7 reporter, interviewing the owner amongst the smouldering
ruins and he asked him:
Did you have any Goggomobiles?
The owner says: yeah, a couple.
Geoff says: not the Dart !!?? (just like the ad)
Owner says: yeah I've got a dart.
I'm ROFLMAO.
Well done Geoff.
FollowupID:
544262
Follow Up By: Member - bill - Sunday, Jan 06, 2008 at 17:46
Sunday, Jan 06, 2008 at 17:46
you have to feel for those bush fire victems bill
FollowupID:
544318
Reply By: Member - Willie , Epping .Syd. - Saturday, Jan 05, 2008 at 19:13
Saturday, Jan 05, 2008 at 19:13
I know a gent in
Ballina ( who is a lurker on here ) who is in the process of modifying one for his 200 .
Maybe he will make a special effort and answer this post .
Willie .
AnswerID:
279973
Follow Up By: Member - bill - Saturday, Jan 05, 2008 at 19:29
Saturday, Jan 05, 2008 at 19:29
hi willie would his name be keith and lives in pimblico
FollowupID:
544176
Follow Up By: Member - Willie , Epping .Syd. - Saturday, Jan 05, 2008 at 22:52
Saturday, Jan 05, 2008 at 22:52
Sorry Bill , Not even close .
I cannot give him up though , he will have to come out of the closet and make a post himself !
Willie
FollowupID:
544200
Reply By: robles - Sunday, Jan 06, 2008 at 21:08
Sunday, Jan 06, 2008 at 21:08
Bill
The back door opens up nearly completly which will enable you to have access to everything in the rear. The only draw back is the window touches the back beam jsut before full extension but he puts a padding on the beam so as to protect the window.
If you give Glen a ring he will be able to send you a photo of
mine and advise on the rack. The new spoiler was a problem but he sorted it out nicely for me. There was never an issue with the door hitting the
boat.
AnswerID:
280145
Reply By: Member - bill - Monday, Jan 07, 2008 at 06:54
Monday, Jan 07, 2008 at 06:54
thanks for that iwill call him today bill
AnswerID:
280218
Reply By: Bill from Custom Boat Loaders- Saturday, Jan 12, 2008 at 12:42
Saturday, Jan 12, 2008 at 12:42
Hi Bill,
We have the prototype for the 200series in at the fabricators now and it will be ready and in production in next 2 weeks. Feel free to call - 0429 112 526 - if you'd like any details.
We have a 3.85m Quintrex Explorer with a 20HP Honda 4 stroke and are really happy with it. We've just spent 10 months - and 35,000ks - on the road on the east coast demonstrating the loaders
Cheers
Dian
AnswerID:
281186